Spray Upside down ! Reduce your waste paint Bill !
Fits onto your existing spray gun – !
3M have developed a
completely new paint system that replaces the need
for traditional paint mixing pots and filters. Instead,
paint is mixed in a liner and is protected from outside
contamination.
The 3M™ Paint Preparation System (PPS) comprises
calibrated mixing cups, flexible liners, lids with
built-in filters, and locking rings. As freshly filtered
paint is dispensed, the liner collapses. This allows
the spray gun to be operated at any angle in any plane
through 360 degrees, including fully inverted.
Additional PPS
benefits include:
• Only one pot for mixing and spraying
• Integral paint filter means fewer defects
• Up to 70% saving of cleaning solvent because
only the spray gun and adapter need to be cleaned
• Faster system – new pots and liners
are now 50% larger to improve operator efficiency
in the spraybooth
• Less operator exposure to solvents through
reduction in volatile organic compounds (VOCs)
• Expensive, unused paint can be saved in capped
liner for storage and subsequent re-use.
Lids and liners,
Collars & Cups, Dispenser Bottle
New PPS products for
even greater productivity
Since the introduction of the awarding-winning PPS
we’ve added these new products to extend the
considerable labour and material savings.
• Economical large cups and liners especially
developed for clear-coats, or for use with base-coats
on larger jobs.
• Short and lightweight Mixing Sticks with contoured
edges for better mixing
• Spray Gun Holder that can be wall or bench
mounted
• Sturdy and lightweight PPS Carrier that allows
multiple liners to be taken into booth (primer, base-coat,
clear-coat)
|
