•
|
A waterborne intumescent coating
for the protection of interior structural steelwork,
providing 30,60 & 90 minutes fire resistance
to structural steel. |
| • |
Tested in accordance with BS 476:Part 21: 1987
by Warrington Fire Research and Building Research
Establishment. |
| • |
Highly competitive loadings for most steel
section sizes, giving reduced application costs. |
| • |
Easy application properties |
| • |
Minimal VOC’s- EPA Compliant and ‘environmentally
friendly’ |
•
|
Topseals are avialble in virtually any colour
including BS4800, RAL, BS381C, BS 2660, NCS &
TVT shade ranges. Topseals are not required in
CI environments. |
•
|
Recommended for on-site applications. Off site
applications must be top coated before being taken
outside and carefully handled. |
| • |
Recommended for interior environments classified
as C1 or C2 under the definitions in ISO 12944-2:1998. |
| • |
Film thickness Wet Microns
= 285-2285 |
| • |
Film thickness Dry Microns
= 200-1600 |
| • |
Finish = Matt |
| • |
Dust Free = 45 Mins at 25 degrees
centigrade |
| • |
Hard Dry = 1 hour at 25 degrees
centigrade |
| • |
Overcoating = Minimum 1 hour
at 25 degrees centigrade |
| • |
Thinners = Water |
