Pre-Catalysed Lacquers |
| SG / Coverage |
| Approx 0.91 / 7 square metres per litre |
| Application |
| supplied. Consult BA Technical Department for use with
other spraying techniques. Special products are available for curtain and roller coating. Air pressure: 35 - 45 psi Fluid pressure: 10 - 15 psi Note: Pre-Catalysed Lacquers should not be applied over sealers containing stearates |
| Drying |
| Touch Dry: 15 - 20 mins Sanding Recoating: 60 – 90 mins These times may be reduced by force drying Packing: Overnight minimum |
| Thinners |
| Dual Thinners: NT2511 |
| Cleaning Fluid |
| NT2013 |
| Retarder Solutions |
| Weak: NT2505 Strong: NT2514 |
| Woodfiller |
| Nitrofilla |
| Stains |
| Non Fade Ground Stain: Suitable Waterstain: Suitable |
| Limitations |
| Do not use over white or pastel shade enamels. A special
non-yellowing Acid Catalysed Lacquer is available for this purpose. Not recommended for use on horizontal working surfaces in laboratory, kitchen or bar situations |
| Packaging |
| Available in 5, 25 and 205 litre containers. |
Health & Safety |
| Refer to Health and Safety Data Sheet for individual products |
 |